CS-SWITCH – Implementing Cisco Switched Networks (SWITCH)

SWITCH v2.0, a five-day ILT course, includes major updates and follows an updated blueprint. (However, note that this course does not cover all items listed on the blueprint.) Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. The course content has been adapted to Cisco IOS Software Release 15 and technically updated.
The goal of the course is to build upon the knowledge and skills from CCNA Routing and Switching and help you expand competencies to plan, implement, and monitor a scalable routing network.

CS-ICND2 – Interconnecting Cisco Networking Devices Part 2 (ICND2) v3.0

Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.1 is an instructor-led course that is presented by Cisco Learning Partners to their end-user customers. This five-day course focuses on using Cisco Catalyst switches and Cisco routers that are connected in LANs and WANs typically found at medium-sized network sites. Upon completing this training course, you should be able to configure, verify, and troubleshoot the various Cisco networking devices in a small network environment.
This course is often taught as part of the Cisco Certified Network Associate (CCNA) Routing and Switching Training Boot Camp v2.0.

CS-ICND1 – Interconnecting Cisco Networking Devices Part 1 (ICND1) v3.0

Interconnecting Cisco Networking Devices Part 1 focuses on providing the skills and knowledge necessary to implement and support a small switched and routed network. For the purpose of this course, a small network is defined as 1 to 20 hosts connected to a single switch, with the switch running a single VLAN (VLAN1). The switch is also connected to a router providing a routed link (Routing Information Protocol [RIP] and default) to a simulated Internet and corporate office. ICND1 works from the bottom up, providing knowledge and skills as they are needed. The course starts with an introduction to networks. It then introduces host-to-host communications using TCP / IP. Next, Layer 2 devices (switches) are introduced into the network. Next, Layer 3 devices (routers) are introduced into the network. The introduction of Layer 3 devices leads to the use of WANs and routing to connect the site to the Internet and corporate sites.

CS-ROUTE – Implementing Cisco IP Routing (ROUTE)

ROUTE v2.0, a five-day ILT course, includes major updates and follows an updated blueprint. (However, note that this course does not cover all items listed on the blueprint.) Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. The course content has been adapted to Cisco IOS Software Release 15 and technically updated.
The goal of the course is to build upon the knowledge and skills from CCNA Routing and Switching and help you expand competencies to plan, implement, and monitor a scalable routing network.

CS-TSHOOT – Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

TSHOOT v2.0, a five-day ILT course, includes major updates and follows an updated blueprint. (However, note that this course does not cover all items listed on the blueprint.) Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. The course content has been adapted to Cisco IOS Software Release 15 and technically updated.
The goal of the course is to build upon the knowledge and skills from CCNA Routing and Switching and help you expand competencies to plan, implement, and monitor a scalable routing network.

CS-IP6FD – Cisco IPv6 Fundamentals, Design & Deployment (IP6FD)

Unitek Training’s Cisco IPv6 Fundamentals, Design & Deployment is a comprehensive overview of IPv6 looks at fundamental theory as well as provides a strong foundation in designing and deploying IPv6 and leveraging the IPv6-ready Cisco IOS. You will get hands-on experience configuring routers and clients for IPv6, and leave with a plan for how to meet the challenges of migration.

CS-CCNA – Cisco Certified Network Associate (CCNA) Routing and Switching Training Boot Camp v3.0

Unitek Training’s CCNA Routing and Switching Boot Camp is one of the most in-demand and popular CCNA certification training in the nation. It is our guarantee that you will get certified in less time, for less money and gain hands-on experience which you will take back to your job. Our certified and experienced Cisco instructors work with you to train you in ICND1 and ICND2 skills to get you certified as a Cisco Certified Network Associate (CCNA).

Our accelerated boot camp style training has revolutionized the IT training industry and after more than twenty years has become the top of the industry standard . Unitek Training’s training teams are recognized as trailblazers that have revolutionized the way IT is taught and absorbed. For our students this means world-class training that keeps you engaged, challenged, and entertained all from the best Cisco certified training team your training dollars can buy.

CS-CCNP-RS – Cisco Certified Network Professional (CCNP) Training Boot Camp

Unitek Training offers the finest accelerated CCNP training available.The CCNP certification validates a network professional’s ability to install, configure and troubleshoot converged local and wide area networks with 100 to 500 or more nodes. Network Professionals who achieve the CCNP certification have demonstrated the knowledge and skills required to manage the routers and switches that form the network core, as well as edge applications that integrate voice, wireless, and security into the network. Get CCNP certified in less time, for less money, and gain real hands-on networking experience. Learn, not cram, using high-end Cisco equipment, in the best-equipped training lab! Two weeks of intense training from Cisco certified industry experts, for an unbelievably low, all-inclusive price.

CS-DCNX1K – Configuring the Cisco Nexus 1000V (DCNX1K)

Configuring the Cisco Nexus 1000V is a three-day instructor-led training program designed for systems and field engineers who install and implement the Cisco Nexus 1000V Switch. The course covers the key components and procedures you need to know to install, configure, manage, and troubleshoot the Cisco Nexus 1000V Switch.

Version 2.0 of this course is an update that covers the feature differences between version 4.2(1)SV1(4a) and version 4.2(1)SV1(5.1). Labs and Courseware are updated in this version of the course.

Additionally time is spent discussing the highlights of emerging features of the Cisco Nexus 1000V.

CS-WMUAPI – Managing Unified Access Networks with Cisco Prime Infrastructure 2.0 (WMUAPI)

Unitek Training’s Managing Unified Access Networks with Cisco Prime Infrastructure 2.0 (WMUAPI) course establishes a strong foundation in managing the full range of Cisco wired and wireless infrastructure using Prime Infrastructure 2.0. During this course you will also explore the Application Visibility and Control capabilities of Prime Infrastructure through monitoring and troubleshooting problems on the network. The course puts the user in the context of a realistic customer scenario, and covers every aspect of Cisco Prime Infrastructure 2.0’s Lifecycle management approach. You will create Sites, Maps, Deploy configurations, perform device discovery as well as learn to set alarms and troubleshoot network and application issues.